So you have the best scuba regulator? Here are 3 tips to take care of it!

The best scuba regulator will surely cost you bucks, for sure. Make the dollars count by maintaining it properly.  Read on and you’ll find useful tips to care for your reg to save yourself underwater – and yes, to save your pocket as well!

 

How-To-Care-For-Your-Scuba-Regulator

 

Although its important to know how to handle your equipment underwater, it’s equally essential to remember to maintain them in good condition otherwise you wouldn’t enjoy the diving experience and it could lead to an accident.

A scuba regulator helps a diver to breath underwater, making it as one of the most important diving equipment. It is the hub that links the pieces of your gear – tank, BCD, alternate air source, and most especially, you. Yes, you!

So learning how to maintain it properly and keep it in top condition surely wouldn’t hurt! Here are convenient tips to take care of your reg:

1. Make use of the dust cap

Divers, let us all make sure the dust cap is always in place when you’re not underwater. Never let a soak dust cap be placed in the opening of the regulator before cleaning it entirely, nor allow any water to enter into the first stage regulator. Ever.

 

2. Bath, Cleanse and Rinse

Use a low-pressure water hose to give a quick rinse to your regulator. Soak it for a while with fresh water to loosen any dirt. (10-20 min soak will do!) Make sure to wash away sands and salts, and cleanse any leftover dirt. While being soaked, let the water flow through the mouthpiece and exhaust tee with a few swishes  in the second stage without damaging the the purge button.

 

3. Finishing Touches 

With a gentle shake from both the first and second stage, check to see if there’s any any water left from the yoke and exhaust tee. Once done, towel dry the regulator while inspecting for damages. Loosely curl it and lay it down where the sun can’t directly shine upon.

 

The most important part

Any equipment that is being stored without being used can cause it to rot/break or be filled with dust. It’s the same with a diver’s regulator. Since a regulator is used for diving, it’s a necessity for it to get wet or else parts of it like the o-ring will be dried up.  And with that, you’ll be spending more money than none.

So yes, go diving often! Your regulator will thank you for it too!

[button title=”Get the Best Scuba Regulators” icon=”” icon_position=”” link=”https://www.bestscubadeals.com/product-category/best-scuba-regulators/” target=”_blank” color=”#e10b0b” font_color=”#ffffff” large=”0″ class=”” download=”” onclick=””]


 

 

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.